Lift Qualifications

Industry recognised

Industry Recognised

Lift and Escalator qualifications are certificated by EAL the Awarding Body for the sector and approved by the industry association (LEIA).

National Vocational Qualification

Commonly known as NVQ’s - these are work-based national standard qualifications that recognise the skills and knowledge for a particular industry. Each candidate needs to demonstrate these skills and knowledge by providing evidence that proves their competency within their industry sector.

High success rate

High Success Rate

Seleta works closely with candidates, managing their ongoing progress with care and expertise so that candidates are fully supported throughout their qualification resulting in high success rates and certification for the candidate.

lift-servicing-qualifications
NVQ Level 3 - Lift Servicing Qualification (QCF)

This qualification is a National Vocational Qualification (NVQ). It involves the skills and knowledge needed for occupations within the engineering maintenance field of servicing passenger lifts.

Full Qualification Name: 
EAL Level 3 Diploma in Engineering Maintenance (Lift Servicing) (501/05449/ENG)

How the Qualification is Achieved: 
The applicant must present evidence (portfolio) which demonstrates that they have met the assessment criteria and learning outcomes. The applicant must achieve the mandatory and optional units relevant to their pathway.

See Summary of Units Here

Additional Units:
Can be added including EOR safety Unit. (Please contact us for further information).

See How the Qualification is Delivered

Entry Requirements:
Applicants must

  • be living in the UK
  • be working within the Lift industry
  • be over 18 years of age
  • have reasonable English literacy skills.
Start date: On demand
Duration: 6-36 Months (experience dependent)
lift-repair
NVQ Level 3 - Lift Repair Qualification (QCF)

This qualification is a National Vocational Qualification (NVQ). It involves the skills and knowledge needed for occupations within the engineering field of repairing and maintaining passenger lifts.

Full Qualification Name: 
EAL Level 3 Diploma in Engineering Maintenance (Lift Repair) (501/05449/ENG)

How the Qualification is Achieved:
The applicant must present evidence (portfolio) which demonstrates that they have met the assessment criteria and learning outcomes. The applicant must achieve the mandatory and optional units relevant to their pathway.

See Summary of Units Here

Additional Units:
Can be added including EOR safety Unit. (Please contact us for further information).

See How the Qualification is Delivered

Entry Requirements:
Applicants must

  • be living in the UK
  • be working within the Lift industry
  • be over 18 years of age
  • have reasonable English literacy skills.
Start date: On demand
Duration: 6-36 Months (experience dependent)
lift-installation
NVQ Level 3 - Traction Lift Installation Qualification (QCF)

This qualification is a National Vocational Qualification (NVQ). It involves the skills and knowledge needed for occupations within the installation field of installing and commissioning of traction passenger lifts.

Full Qualification Name: 
EAL Level 3 Diploma in Installation & Commissioning (Traction) (501/07331/ICC)

How the Qualification is Achieved:
The applicant must present evidence (portfolio) which demonstrates that they have met the assessment criteria and learning outcomes. The applicant must achieve the mandatory and optional units relevant to their pathway.

See Summary of Units Here

Additional Units:
Can be added including EOR safety Unit. (Please contact us for further information).

See How the Qualification is Delivered

Entry Requirements:
Applicants must

  • be living in the UK
  • be working within the Lift industry
  • be over 18 years of age
  • have reasonable English literacy skills.
Start date: On demand
Duration: 6-36 Months (experience dependent)
hydraulic-lift-installation
NVQ Level 3 - Hydraulic Lift Installation Qualification (QCF)

This qualification is a National Vocational Qualification (NVQ). It involves the skills and knowledge needed for occupations within the installation field of installing and commissioning of Hydraulic passenger lifts.

Full Qualification Name: 
EAL Level 3 Diploma in Installation & Commissioning (Hydraulic) (501/07331/ICD)

How the Qualification is Achieved:
The applicant must present evidence (portfolio) which demonstrates that they have met the assessment criteria and learning outcomes. The applicant must achieve the mandatory and optional units relevant to their pathway.

See Summary of Units Here

Additional Units:
Can be added including EOR safety Unit. (Please contact us for further information).

See How the Qualification is Delivered

Entry Requirements:
Applicants must

  • be living in the UK
  • be working within the Lift industry
  • be over 18 years of age
  • have reasonable English literacy skills.
Start date: On demand
Duration: 6-36 Months (experience dependent)
service-lifts
NVQ Level 2 - Servicing Service Lifts Qualification (QCF)

This qualification is a National Vocational Qualification (NVQ). It involves the skills and knowledge needed for occupations within the engineering maintenance field of servicing and repairing service lifts.

Full Qualification Name: 
EAL Level 2 Diploma in Engineering Maintenance and Installation (Servicing Service Lifts) (501/0147/ENH)

How the Qualification is Achieved:
The applicant must present evidence (portfolio) which demonstrates that they have met the assessment criteria and learning outcomes. The applicant must achieve the mandatory and optional units relevant to their pathway.

See Summary of Units Here

Additional Units:
Can be added including EOR safety Unit. (Please contact us for further information).

See How the Qualification is Delivered

Entry Requirements:
Applicants must

  • be living in the UK
  • be working within the Lift industry
  • be over 18 years of age
  • have reasonable English literacy skills.
Start date: On demand
Duration: 6-24 Months (experience dependent)
installing-service-lifts-2
NVQ Level 2 - Installing Service Lifts Qualification (QCF)

This qualification is a National Vocational Qualification (NVQ). It involves the skills and knowledge needed for occupations within the engineering Installation field of Installing Service lifts.

Full Qualification Name: 
EAL Level 2 Diploma in Engineering Maintenance and Installation (Installing Service Lifts) (501/0147/ENJ)

How the Qualification is Achieved:
The applicant must present evidence (portfolio) which demonstrates that they have met the assessment criteria and learning outcomes. The applicant must achieve the mandatory and optional units relevant to their pathway.

See Summary of Units Here

Additional Units:
Can be added including EOR safety Unit. (Please contact us for further information).

See How the Qualification is Delivered

Entry Requirements:
Applicants must

  • be living in the UK
  • be working within the Lift industry
  • be over 18 years of age
  • have reasonable English literacy skills.
Start date: On demand
Duration: 6-24 Months (experience dependent)

Enquire About:

***

We’re Sorry to Hear You Are Not Happy

Let us try to resolve it for you.

If you would like to raise a complaint or have any problems with the services provided, please complete the form below.

Installation and Commissioning (Hydraulic Lift Installation) Qualification Units

All assessment units must be completed.

EAL Code Assessment Unit
QICM2/001 Complying with Statutory Regulations and Organisational Safety Requirements.
QICM2/002 Using and Interpreting Engineering Data and Documentation.
QICM3/003 Working Efficiently and Effectively in Engineering.
QICM3/004 Handing Over and Confirming Completion of Installation or commissioning Activities.
QICM3/035 Carrying Out Fault Diagnosis on Lift Installations.
QICM3/036 Measuring and Setting Out Lift Installations.
QICM3/037 Installing Lift Well and Ancillary Equipment.
QICM3/039 Installing Lift Ropes and Chains
QICM3/040 Installing Lift Doors, Frames and Ancillary Components.
QICM3/041 Checking and Setting Lift Installations.
QICM3/042 Installing hydraulic Lift Equipment.

Installation and Commissioning (Traction Lift Installation) Qualification Units

All assessment units must be completed.

EAL Code Assessment Unit
QICM2/001 Complying with Statutory Regulations and Organisational Safety Requirements.
QICM2/002 Using and Interpreting Engineering Data and Documentation.
QICM3/003 Working Efficiently and Effectively in Engineering.
QICM3/004 Handing Over and Confirming Completion of Installation or commissioning Activities.
QICM3/035 Carrying Out Fault Diagnosis on Lift Installations.
QICM3/036 Measuring and Setting Out Lift Installations.
QICM3/037 Installing Lift Well and Ancillary Equipment.
QICM3/038 Installing Traction Lift Equipment
QICM3/039 Installing Lift Ropes and Chains
QICM3/040 Installing Lift Doors, Frames and Ancillary Components.
QICM3/041 Checking and Setting Lift Installations.

Installing Service Lifts Qualification Units

All assessment units must be completed.

EAL Code Assessment Unit
QENM2/001 Complying with Statutory Regulations and Organisational Safety Requirements.
QENM2/002 Using and Interpreting Engineering Data and Documentation.
QENM2/003 Carrying out Engineering Activities Efficiently and Effectively.
QENM2/004 Handing Over and Confirming Completion of Maintenance or Installation Activities.
QENM2/042 Carrying Out Fault Location on Service Lifts
QENM2/046 Installing Service Lifts

Servicing Service Lifts Qualifications Units

All assessment units must be completed.

EAL Code Assessment Unit
QENM2/001 Complying with Statutory Regulations and Organisational Safety Requirements.
QENM2/002 Using and Interpreting Engineering Data and Documentation.
QENM2/003 Carrying out Engineering Activities Efficiently and Effectively.
QENM2/042 Carrying Out Fault Location on Service Lifts.
QENM2/043 Carrying Out Servicing of Service Lift Equipment.
QENM2/044 Restoring Service Lifts to Service by Replacing or Repairing Components.

Lift Repair Qualification Units

All assessment units must be completed.

EAL Code Assessment Unit
QENM2/001 Complying with Statutory Regulations and Organisational Safety Requirements.
QENM2/002 Using and Interpreting Engineering Data and Documentation.
QENM3/003 Carrying out Engineering Activities Efficiently and Effectively.
QENM3/004 Handing Over and Confirming Completion of Maintenance or Installation Activities.
QENM3/044 Carrying Out Fault Diagnosis on Lifts.
QENM3/046 Checking Lift Function.
QENM3/047 Rectifying Faults in Lifts.
QENM3/048 Repairing/Replacing Lift Doors, Chains, Ropes and Equipment.

Lift Servicing Qualification Units

All assessment units must be completed.

EAL Code Assessment Unit
QENM2/001 Complying with Statutory Regulations and Organisational Safety Requirements.
QENM2/002 Using and Interpreting Engineering Data and Documentation.
QENM3/003 Carrying out Engineering Activities Efficiently and Effectively.
QENM3/004 Handing Over and Confirming Completion of Maintenance or Installation Activities.
QENM3/044 Carrying Out Fault Diagnosis on Lifts.
QENM3/045 Inspecting and Servicing Lift Equipment.
QENM3/046 Checking Lift Function.
QENM3/047 Rectifying Faults in Lifts.

How the Qualification is Delivered

1. Enrolment

An induction date and time will be proposed for the candidate. There are two methods for carrying out the induction: remotely via video link or on-site/company premises. For those who opt for remote inductions, the portfolio will be sent to them prior to their induction date. During the induction, the candidate will meet the assessor and complete any necessary forms for their qualification. The assessor will explain how the programme operates and what the candidate needs to produce, while also providing an opportunity for the candidate to ask questions.

2. Reviews

Formal candidate reviews are scheduled every month for the first three months, and then every two months thereafter. These reviews can be conducted face-to-face or via video link. During the review the assessor will discuss the evidence submitted, assess the evidence, provide feedback, and answer any queries the candidate may have. A review form will be completed by the assessor, providing details about what has been assessed and completed, including an updated action plan for their next review. This form will then be emailed directly to both the employer and candidate. To assist the candidate, they may submit their evidence and knowledge questions to their assessor prior to their review date.

3. On-site Observations

On-site observations are an excellent way to demonstrate your technical competence, ensuring that you adhere to industry standards of health and safety as well as practical skills /technical knowledge. This reliable, independent evidence can help to reduce the amount of other evidence needed and the time spent completing the qualification. Site observations are typically scheduled towards the end of the qualification program and are conducted at the engineer's place of work.

4. Certification

Once the candidate has finished compiling their portfolio, it will undergo a final assessment. Seleta's IQA Officer will then review and submit the application for certification. An electronic certificate will be emailed to the employer, while the original hardcopy will be sent to the candidate via post.

Enquire About:

***